top of page
REVER - LUCIANO - Downtown WPB.jpg

REVER Package

24 Volts FULL POWER

  • Great for vertical and horizontal loads, Rigid and Vibration Free

  • 12 and 24 volts from a single 12v Battery

  • 2 x hdsdi 6G 

  • Up to 3 batteries Hotswapt simultaneously 12v  and 24v

  • Carbon fiber 50mm with 1.8" lower post

  • Endless configuration

  • Extremely versatile, the sled can be configured for any camera on the market including Black Magic, Red,  Arri or Sony Venice.

It is compact, strong, rigid and lightweight. The modular design can be easily modified, upgraded and maintained.

​

​

HOTSWAP POWER

  • 3 Batteries Hotswap 1,2 or 3 12v Battery can power all 12 and 24v outputs. 

  • 3 x 12v power D-tap outputs on the upper box with a maximum draw of 10 amp combined.

  • 1x 12V Lemo 1B outputs with a maximum draw of 15 amps. 

  • 1x 12V Lemo 1B outputs on the Lower box with a maximum draw of 15 amps. 

  • 1x 24V volts outputs on the upper box with a maximum draw of 3 Amps. Works well for Alexa Mini or any low-consumption camera and accessories 

  • 2 x HDSDl 6G

​

​

REVER Series1.jpg

REVER
Gimbal

REVER GIMBAL

Featuring aluminum 7075 and Swiss Hybrid ceramic dry bearings which allows the gimbal to function as a super smooth system. With a tool-free clamp mechanism smartly positioned  to not interfere with the operator's hand placement.

Manufactured with the highest tolerance from the CNC Machine.

50MM CARBON FIBER POST

For maximum stability, the REVER features a 50mm wide, 2 section carbon fiber post. Fully extendable up to 120cm making it great for high and low mode.

MONITOR MOUNT

  • ​Attaches to the center of gravity of the monitor with 2 1/4 thumb knobs with the rotating system the monitor position can be adjusted without any tool

  • Fits on the lower and center post.

  • If utilizing the telescopic system, you can attach  5 to 8 inch monitors with side mounts 1/4holes

TOP STAGE OF REVER SLED

  • Easily attachable dovetail Quick Release

  • Regulation fore/aft and side by side controllers you can adjust weight distribution effortlessly to deliver perfect  dynamic balance

  • Vibration free

REVER ONE Stabilizer

REVER ONE ARM

  • ISO Full range

  • 1lb to 70lb payload with the same arm and springs

  • Ability to effortlessly boom up and down - 80cm boom range without kickbacks

  • Super strong construction  with aluminum 7075 and stainless steel

  • Torsion and Friction free 

  • Free spin and standard arm post ⅝

  • Fine tuning knob

  • Standard stainless steel socket block

  • Made in the USA

Accessory cables for the REVER Stabilizer

  • 12v to 3x Dtap splitter,

  • Red DSMC & DSMC2 Power Cable,

  • Arri Alexa xt Power Cable

  • Arri Amira & Alexa Mini Power Cable (3FT)

  • 3-Pin XLR Power Cable (24v) 3FT

  • 4-pin XLR Power Cable 3FT (12V).

bottom of page